-
Automotive SENT Controller
SENT (single edge nibble transmission) is a serial communication protocol between automotive sensors and ECU (electronic control unit). SENT exploits digital waveform, so it has a simple and cheap architecture without transceiver circuits. Usually it is exploited as an embedded communication interface in the sensors. I..
KU359S0937 | 2018-02-19
-
HDCP1.4/2.2 Tx IP
HDCP(High-bandwidth Digital Content Protection) IP is a key security module that addresses all the requirement of latest premium content protection.
A HDCP transmitter and receiver pair must perform authentication before it starts Audio Video transfer. The authentication involves a series of control message exchange..
KC553H0812 | 2016-05-23
-
HDCP1.4/2.2 Rx IP
HDCP(High-bandwidth Digital Content Protection) IP is a key security module that addresses all the requirement of latest premium content protection.
A HDCP transmitter and receiver pair must perform authentication before it starts Audio Video transfer. The authentication involves a series of control message exchanges..
KC553H0811 | 2016-05-23
-
1.5 Gb/s Transceiver for SDI Application
1.5Gb/s Transceiver is designed for SDI(Serial Data Interface) Application, operating at 500Mb/s, 1Gb/s and 1.5Gb/s data rates. The proposed 1.5 Gb/s Transceiver is implemented by using a 0.13-um CMOS with a 1.2V & 3.3V supply.
KU372H0664 | 2015-05-20
-
7.5Gb/s Output driver with double pre-emphasis
The designed output driver with pre-emphasis is controlled by internal adaptation algorithm. With pre-defined channel information, the coefficient of the output driver is controlled. Also, to reduce power consumption, pre-emphasis is performed twice. To drive with low power consumption, the driver for the output driver..
KS064H0276 | 2012-11-07