Search IP

Home > Search IP

IP Category

Browser by Category
Browser by Foundry
Browser by Technology
  • 기업 IP
  • 대학·연구소 IP
  • N관련된 신규용역가능
  • M수정/가공 판매가능
  • T기술지원 가능
  • P현 상태로만 판매가능
total: 71/847 IP Cores
    • 기업 IP
    • N
    • M
    • T

    1.2V POR

    Power-On Reset (POR) 1.2V IP provides a fixed-width reset pulse to initialize the chip after supply power (1.2V). When the supply power is applied to 1V, the reset signal is output. Hysteresis of threshold voltage is 50mV, and assertion delay is 20us. POR 3.3V IP has low power operation characteristics of 2uA.

    KC639H1114 | 2021-11-26

    • 기업 IP
    • N
    • M
    • T

    DCDC 1A

    The DCDC 1A is an ultra fast response, high output current(1A), step down switched DC-DC regulator IP. It is the best supply solution for high power power digital cores with fast activity variation. Specially designed for SoC integration it uses advanced control techniques to achieve soft start-up, transient respons..

    KC639H1111 | 2021-11-10

    • 기업 IP
    • N
    • M
    • T

    uLDO

    uLDO IP is an LDO that receives 1.8V power and outputs a stable 0.9V voltage. The load current capacity of this IP is 1mA, and it has a quiescent current of 500nA. The output voltage is adjustable in 25mV steps. And the load regulation of uLDO IP is 0.74mV, and the start-up time is 0.8ms.

    KC639H1102 | 2021-11-10

    • 기업 IP
    • N
    • M
    • T

    BOD

    This IP is a CMOS voltage detector for SoC applications. The device includes a comparator, a low-current reference, a divider, a hysteresis circuit, and an output driver. The rising threshold voltage of POR 1.8V IP is 0.6V~1.5V, the hysteresis voltage can be changed from 50mV to 20mV step, and the assertion delay is..

    KC639H1101 | 2021-11-10

    • 기업 IP
    • N
    • M
    • T

    POR 0.9V

    Power-On Reset (POR) 0.9V IP provides a fixed-width reset pulse to initialize the chip after supplying power (0.9V). When the supply power is applied to 0.6V, the reset signal is output. Hysteresis of threshold voltage is 50mV, and assertion delay is 50us. POR 0.9V IP has low power operation characteristics of 2uA.

    KC639H1100 | 2021-11-10