-
BOD
This IP is a CMOS voltage detector for SoC applications.
The device includes a comparator, a low-current reference, a divider, a hysteresis circuit, and an output driver.
The rising threshold voltage of POR 1.8V IP is 0.6V~1.5V, the hysteresis voltage can be changed from 50mV to 20mV step, and the assertion delay is..
KC639H1101 | 2021-11-10
-
High accuracy Bandgap reference circuit
The HTL065S1P2BGR is a 1.2 V band gap core reference designed specifically for applications experiencing heavy dynamic supply variations, such as data converter references. The HTL065S1P2BGR is also suitable for a variety of general-purpose applications.
KC581H1044 | 2020-11-05
-
LDO with low power consumption
Our IP can support various Power mode(Idle Mode (10mA load), Normal Mode (120mA load), Power-down Mode (No load)). And also Low Current Consupmtion(Idle Mode: Under 500nA, Normal Mode: Under 50uA including Low-Power BGR, POR).
It can adjust Output voltage within ±20mV using 6bits Resolution Trimming.
KC589H0946 | 2018-05-24
-
3.3V to 1.8V, 120mA LDO(with POR)
This low drop-out voltage regulators (LDO) IP, occupying an area of 500 X 200 um2, was implemented with TSMC 0.18um 2P6M CMOS process.
The LDO IP, designed with 3.3V transistors and MIM capacitors, operates with 2.7V to 3.3V power supply
In the normal operation mode, the LDO IP supports 1.8V voltage output and covers..
KC050H0699 | 2015-08-17
-
A Rectifier for RF Energy Harvesting System
This RF rectifier uses the internal threshold voltage cancellation technique and quality factor multiplication technique. These techniques improve the power conversion efficiency of the rectifier as well as enable longer power transfer. Even though the floating MOS technique is used, the speed-up technique helps the fa..
KU064H0542 | 2014-09-01